RRD DYNAMIC PRO ALU SWK 900 FOIL SET Y26 (year 2021/2022)
FREESTYLE _WAVE SURF-SUP/ WING / KITE FOILING Recommended for kitefoil freeride and wave use and for expert surfoilers and wingfoilers (riders weight between 65 – 89 kg).
Include: 900 Dynamic Pro carbon front wing / 210 Dynamic Pro carbon rear wing / 85cm Universal ALU mast / Universal fuselage 66 cm
Free Shipping to all Europe from 299 euro
Delivery 48h to 6d depending the Country
2 Years Warranty and Shipping Insurance
Until 15 Days with the Right of Return
The Dynamic Pro Alu SWK is a no compromise foil set. Each component is simply on a league of its own in terms of raw material selection and hydrodynamics up to the point that it suits the most demanding wing, surf and kite – foilers.
The Dynamic Pro front wing profile is the engine of this hi performance foil, designed with a negative dihedral angle turning into a neutral one on the tips. This special wing design with a differentiated dihedral angle is the base for turning potential and stability. You’ll fly with control at a higher speed and draw the sharpest turns.
The new Universal Alu 85 mast sets a new standard for aluminium hi-performance masts being 30% stiffer and lighter due to a new profile and light integrated plate. This mast perfectly connects with the fuselage and wings resulting in an ultra rigid set appreciated by most riders out there.
What you are getting is a specialist and performance hydrofoil.
For those looking for a great cross over between kite and surf foiling, The Dynamic Pro Alu SWK 900 is the scale down of the SWK 1200. This combo is suitable for expert surf and wing foilers who want to ride big and push beyond their level. You’ll benefit from its tremendous Vmax and precise radiuses during turns. The shorter 66 cm fuselage allows for better control to ride difficult sections of steep and powerful waves, however it takes off quite early despite its small size. For kitefoiling you will enjoy its playful DNA, as it is definitely a jewel to ride and surf. It is all about control, carving and gliding with incredible stability and predictability at a great average speed.
Recommended for kitefoil freeride and wave use and for expert surfoilers and wingfoilers (riders weight between 65 – 89 kg).
- UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26
- DYNAMIC PRO CARBON FRONT WING 66,4 /900 Y26 with EVA COVER
- UNIVERSAL REAR WING 37/210 Y26 with EVA COVER
- UNIVERSAL FUSELAGE 66 with WITH EVA COVER Y26
- M8 TORX SCREWS & KEY SET
The new wider profile and stiffer Universal ALU mast with integrated plate is the top combination for speed potential and superior control. The aluminum plate has been optimized in dimension and integrated into the alu mast using new 8 mm diameter screws to obtain a more solid connection. This mast is 15% lighter and stiffer both in flex and torsion, compared to his predecessor. It has a maximum thickness of 18mm and its profile is also proportionally thicker towards the rear part of the mast in order to minimise twist. We have also introduced a new middle stringer structure in between the two screws that have allowed a higher lateral stiffness. The mast Is now waterproof.
FRONT AND REAR WINGS LAYUP
If you want to have that feeling of speed matched with control than look no further. Extremely light due to its high density foam core with a 100% carbon shell, the Dynamic Pro carbon front wing is designed for the performance you’ve always dreamed of. Its profile with a pronounced camber ending with an inverted semi winglet provides a predictable behaviour at higher speeds. Combined with the new Dynamic Pro carbon rear wing you get a combo for both surf and wingfoil experts and all levels of kitefoilers.
REMOVABLE PLATE CONNECTOR / WING CONNECTION
The new Universal fuselage has an extra wide head area to carry and support super wide wings (up to 120 cms wingspan and 2500 sqcms) and entirely redesigned for maximum lightweight. Its new wider middle and front section design can sustain higher flex pressure and torsion pressure from the input of the mast and front wing and offers an improved level of stiffness. Lighter and stiffer!
MAST FUSELAGE CONNECTION
New 8mm diameter Torx screws for mast, fuselage and wings has improved connectivity to improve in stiffness and for more user friendly assembly / disassembly. No more damaged screw heads and threads!
MAST FUSELAGE CONNECTION
The new mast foot adaptor design is now wider for improved lateral stiffness, securing a “one welded piece“ feeling between fuselage and mast. Hi density Plastic connector/adaptors to avoid oxidation between mast and fuselage connection. 2 x 8mm diameter Torx screws for a reliable, strong and quick connection. Thanks to the use of these mast foot adaptors you can switch your foil from an Alu to a Carbon Mast. No need to change your fuselage.
FOIL SET BAG (sold separately)
Our new foil set bag 120 can fit any set and parts of our complete Y26 Hydrofoil collection.There are velcro attachments that will fit and lock every part inside its padded cover so every component of any size will be secure and not move inside the bag.
|MODEL||MAST||FUSELAGE||FRONT WING||REAR WING|
|DYNAMIC PRO ALU SWK 900 FOIL SET||85 cm||66 cm||Wing span 66,4 cms / wing area 900 cm2||Wing span 37 cms / wing area 210 cm2|
Be the first to ask a question about this product!